Monel Polished Plate Manufacturers in India

Monel Plate shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and it's especially suitable for reducing conditions. There are different commercial grades of Inconel Plates such as Alloy 400 Plate, Alloy 401 Plate, Alloy R-405 Plate, Alloy 450 Plate, Monel K500 Plate, Monel 404 Plate Copper-Nickel Alloy. Monel Coil is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. This sophisticated composition allows this Monel Strip to be heat treated to give higher strength and durability, alongside resistance from sub-zero temperatures right up to 480°C. Monel Flat Shim, Monel Perforated Plate, Monel Cold rolled Plate, Monel Foil & Monel Rolling Sheets can be cold formed by standards methods.

Buy Monel Coil, Strip, perforated sheet, and Monel cold-rolled plate at best price in Mumbai

Looking for the best price of Monel Clad Plate in India? We have no minimum footage requirements. We will supply the exact amount of Monel Flat Sheet you require even if it’s a small quantity of Monel Rolling Plate. Contact Steel Tubes India- the right supplier of Monel Shim near you.

Steel Tubes India offers one of the widest ranges of Monel sheets in various qualities, sizes, and grades which are equivalent to Monel Plate (2mm to 12mm). Monel Sheet is available in thicknesses ranging from .016 to .156". A large size Monel Plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Monel Sheets, thin and ultra-thin gauge Monel Alloy strip, and foil products, rolled down to 2 microns.

Superior technology, as well as extensive quality control from steelmaking to finishing, assure the stable production of Monel Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Monel Polished Plate by pickling or buff-polishing. Monel Strips levels of finishing & cut can be adjusted according to your requirements. Monel Plate is available in the form of Sheets, Coils, Foils, Rolls, Plain sheets, Shim Sheets, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, and Flat Shim. The Monel Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of plates based on dimensions and shape.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange a complete range of Monel plates in the shortest time as well at the best price, because we maintain Monel Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Monel sheet from any other vendor or Manufacturer of mirror finish Monel Plate in India.

MONEL PLATE SPECIFICATION

ASTM Specification	ASTM B127, ASME SB127
Grades	Monel 400 Plate -MONEL alloy 400 (UNS N04400) Monel K500 Plate - MONEL alloy K-500 (UNS N05500) Monel R-405 Plate -MONEL alloy R-405 (UNS N04405)
Specification	MSRR, AMS, BS, ASTM B127 / ASME SB127
Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness	0.1mm to 100 mm Thk
Width	10-2500mm
AMS	AMS 4544
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of	Monel Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Monel Sheet	EN 10204/3.1B Huge Stock, Timely delivery Raw Materials Certificate 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished Monel Plate
Monel profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Clad plate: Monel Clad plate is a composite steel plate made by bonding Monel plate, etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Monel Plate

Difference between Monel Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Monel Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Monel Sheet.

If thickness less than 0.15mm is then its a Monel Foil.

Monel Sheet Weight Per Foot

Monel sheet weight per foot can be calculated by using an online calculator which is available for use for free. Monel is used in many applications and industries of the likes of shafts, fasteners, valves, heat exchangers, pumps, marine engineering, fittings, hydrocarbon processing equipment, etc. Monel is also used as eyeglass frames and metal instruments. There are 6 kinds of Monel alloys and these are nickel-based alloys consisting of between 29 – 33% copper. Monel also consists of manganese and iron, as well as other compounds. There are various types of Monel such as Monel 404 Copper-Nickel Alloy, Alloy R-405, Alloy 400, Alloy 450, Alloy 401, and Alloy K-500.

Monel Sheet Sizes

Sizes in Inches	Sizes in mm
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.625"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

Metric Dimensions

Surface finish	Thickness (mm)	Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Imperial Dimensions

Surface finish	Gauge (in)	Width (in)
2B – Cold rolled, heat treated, pickled, skin passed	10–24	max. 72*
2D – Cold rolled, heat treated, pickled	12–24	max. 60
BA Mexinox only	18–28	max. 48
Polished (not brushed)	11–24	max. 60
Temper rolled Mexinox only	13–29	max. 48

An estimated delivery time location wise for Monel Sheet & Plate

Country	Days	Country	Days
USA	45	Canada	45
Australia	30	UK	35
Malaysia	15	Poland	15
Iran	7	Singapore	14
Vietnam	20	Albania	20
UAE	15	Thailand	20
Nigeria	40	Ethiopia	40
Turkey	30	Tanzania	30
Bahrain	15	Kenya	40
Libya	40	Syria	40
Zambia	40	Egypt	40
Italy	40	India	7
Saudi Arabia	15	Qatar	15
Namibia	40	Indonesia	20
South Africa	40	Australia	40
Uganda	40	Angola	40
Kazakhstan	20	Algeria	20

Monel sheet manufacturers in India