We Are Available in Sanand, Ahmedabad
Add- Plot No- E-372, BOL- GIDC Sanand II, Ahmedabad- 382170, Gujarat, India
Alloy Steel Flanges Manufacturers in Pune, Maharashtra
MSI Fittings is one of the recommended Alloy Steel Flanges Manufacturers in Pune, Maharashtra and Alloy Steel Flanges Suppliers in Maharashtra. Type Alloy Steel Lap Joint Flanges with chromium contents of at least 20 % tо 40 %, can be used at temperatures up to 1725 Degree F – 1850 Degree F (941 Degree C – 1010 Degree C). C. Type Alloy Steel Plate Flanges have no appreciable price difference between alloy steel flange. Alloy Steel Plate Flanges have a temperature range where corrosion resistance is important. Alloy Steel Slip On Flange (SORF) is resistant to atmospheric conditions, water, and some chemicals. Flat Face Flange is mostly used in the alloy steel flange family. Alloy Steel Pipe Flanges has Better quality, high strength, Good finish, and ехсеllеnt gеnеrаl соrrоsіоn rеsіstаnсе tо sulfurіс асіd аnd tо сhlоrіdе strеss соrrоsіоn сrасkіng.
Alloy steel pipe flanges at really low prices in Pune, Maharashtra. Visit our manufacturing unit Alloy steel plate flanges in Pune, Maharashtra, ask for Alloy steel flanges free sample.
Alloy Steel Spectacle Blind Flange & Alloy Steel Threaded Flange is general alloy steel usually supplied in the Normalised and Tempered or Quench and Tempered condition. Alloy Steel Welding Neck Flange(WNRF) gives a service where corrosion resistance is important. Our Alloy Steel Flange is dependent on the final requirements of customers. We believe in customers satisfaction with our product and quality of the product which we gonna supply to our customers. We Are the most versatile and widely Supplier of Alloy Steel Raised Face Flanges. The benefits of our manufacture Alloy Steel Flanges include a long service life that will retain an attractive, clean finish with a low maintenance cost, therefore contact us.
Alloy steel flanges Price List Pune, Maharashtra
| Alloy Steel Flanges | US $0.5-900 / Piece (FOB Price) |
| Alloy Steel Pipe Flanges | US $300-400 / Ton (FOB Price) |
| Alloy Steel Forged Flanges | US $1-800 / Piece (FOB Price) |
| Alloy Steel Socket Weld Flanges | US $0.5-900 / Piece (FOB Price) |
| Alloy Steel Blind Flanges | US $1-200 / Piece (FOB Price) |
Please note this is an approx Cost of Alloy steel pipe flanges in Pune, Maharashtra. For final alloy steel plate flanges price list please contact us.
Alloy steel flanges manufacturers in Pune, Maharashtra
MSI Fittings is manufacturer of Alloy Steel Flanges, forged, ASTM A182 (dual marked and certified), ASME B16.5, annealed and fully machined, raised face, smooth finish (125-250 RMS / 3.2-6.3µM) to MSS-SP6, Alloy Steel Flanges hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.
Alloy steel flanges Specification and Standards
| Specifications | Alloy steel threaded flanges |
|---|---|
| ASME B16.5 Alloy Steel Flanges size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Alloy Steel Flanges Standards | ANSI B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
| Alloy Steel Flanges Standard ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Alloy Steel Flanges Standard DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| Alloy Steel Flanges Standard JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| Alloy Steel Flanges Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Alloy Steel Flanges Standard EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Main Types | Forged / Threaded / Screwed / Plate |
| Flanges supporting material | Gasket, Ring Joint, Flange Bolts |
| Alloy Steel Pipe Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Most common types of Alloy Steel Flanges |
|
| Production technique |
|
| Connect Type/ Flanges Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS Alloy Steel Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Specialized manufacturer of |
|
| Alloy steel flanges Standard | DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
| Key markets and industries for Alloy Steel Flanges |
|
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
| Alloy steel flanges Application |
|
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Alloy Steel Pipe Flange Dimensions
| AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) |
|
|---|
Prestige quality Alloy Steel Flanges Manufacturers in Pune, Maharashtra offer these Alloy steel threaded flanges in DIN, ISO, JIS or ANSI standard.
Alloy Steel Flanges Weight Chart
15mm (1/2") Alloy Steel Flange Weight Chart
| Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
| AS4087 Flanges | PN14 Flanges | 95 | 67 | 4 | M12 | 14 |
| AS 2129 Flange | Table C Flanges | 95 | 67 | 4 | 13 | 14 |
| Table D Flanges | 95 | 67 | 4 | 13 | 14 | |
| Table E Flanges | 95 | 67 | 4 | 13 | 14 | |
| Table F Flanges | 95 | 67 | 4 | 13 | 14 | |
| Table H Flanges | 114 | 83 | 4 | 16 | 17 | |
| Table J Flanges | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 Flanges | ANSI 150 Flanges | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 Flanges | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 Flanges | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 Flanges | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 Flanges | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) Flange | PN6 Flanges | 80 | 55 | 4 | M10 | 11 |
| PN10 Flanges | 95 | 65 | 4 | M12 | 14 | |
| PN16 Flanges | 95 | 65 | 4 | M12 | 14 | |
| PN20 Flanges | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 Flanges | 95 | 65 | 4 | M12 | 14 | |
| PN40 Flanges | 95 | 65 | 4 | M12 | 14 |
MSI Fittings is an ISO certified Alloy steel pipe flanges manufacturer & distributor in Pune, Maharashtra
MSI Fittings is a manufacturer and supplier of Alloy steel flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.
| Alloy steel A182 Pipe Flanges | Alloy Steel Raised Face Slip On Flanges |
| Alloy steel A182 Exhaust Flanges | ASME SA182 Slip On Plate Flanges |
| Alloy steel A182 Header Flanges | Alloy Steel Slip On Flanges |
| Alloy steel A182 Plate Flanges | A182 Pipe Flanges |
| Alloy steel A182 Backing Flanges | Alloy Steel Exhaust Flanges |
| Alloy steel A182 Tube Flanges | ASME SA182 Header Flanges |
| Alloy steel A182 Stub End Flanges | Alloy Steel Raised Face Weld Neck Flanges |
| Alloy steel A182 Shower Rod Flanges | Alloy steel A182 Sae Flanges |
| Alloy steel A182 Slip On Flanges | Alloy Steel Weld Neck Flange |
| Alloy steel A182 Screwed Flanges | Alloy steel A182 Clad Flanges |
| Alloy steel A182 Socket Weld Flanges | Alloy steel A182 Alloy Steel WNRF Flange |
| Alloy steel A182 Sbc Header Flanges | Alloy Steel Raised Face Blind Flanges |
| Alloy steel A182 Split Flanges | ASME SA182 Blind Flanges |
| Alloy steel A182 Slip-On Pipe Flanges | Alloy Steel Blind Flange |
| Alloy steel A182 Square Flanges | Alloy steel A182 Ansi Flanges |
| Ansi 150 ASTM A182 Flanges | ASTM A182 Alloy Steel BLRF Flanges |
| Alloy steel A182 Blank Flanges | Alloy Steel Orifice Flanges |
| Alloy steel A182 Bsp Flanges | ASME SA182 Orifice Flanges |
| Alloy steel A182 Companion Flanges | Alloy Steel Orifice Flanges |
| Alloy steel A182 Class 150 Flanges | Alloy steel A182 Duct Flanges |
| Alloy steel A182 Cover Flanges | A182 Alloy Steel Orifice Flanges |
| Custom Alloy steel A182 Flanges | Alloy Steel Socket weld Flanges |
| Class 600 Alloy steel A182 Flanges | ASME SA182 Socket weld Flanges |
| Alloy steel A182 Din Flanges | Alloy Steel Socket weld Flanges |
| Large Diameter Alloy steel A182 Flanges | Alloy steel A182 SWRF Flanges |
| Table E Alloy steel A182 Flanges | ASME B16.5 Alloy Steel Socket weld Flanges |
| Alloy steel A182 Floor Flanges | Alloy Steel Threaded Flanges |
| Alloy steel A182 Forged Flanges | ASME SA182 Threaded Flanges |
| Gaskets For Alloy steel A182 Flanges | Alloy Steel Threaded Flanges |
| Alloy steel A182 Handrail Flanges | Alloy steel A182 Manifold Flanges |
| High Pressure Alloy steel A182 Flanges | Alloy steel A182 Threaded Flanges |
| Alloy steel A182 Lap Joint Flanges | Alloy steel A182 Alloy Steel Threaded Flanges |
| Alloy steel A182 Long Weld Neck Flanges | Alloy Steel Long weld Neck Flanges |
| Alloy steel A182 Metric Flanges | ASME SA182 Long weld Neck Flanges |
| Alloy steel A182 Muffler Flanges | Alloy Steel Long weld Neck Flanges |
| Alloy steel A182 Pump Flanges | Alloy steel A182 Orifice Flanges |
| Alloy steel A182 Pressed Flanges | Alloy Steel Ring Type Joint Flanges |
| Alloy steel A182 Puddle Flanges | ASME SA182 Ring Type Joint Flange |
| Alloy steel A182 Pad Flanges | Alloy Steel RTJ Flanges |
| Alloy steel A182 Reducing Flanges | Alloy Steel RTJ Flanges |
| Alloy steel A182 Raised Face Flanges | Alloy steel A182 RTJ Flanges |
| Alloy steel A182 Ring Flanges | BS4504 Alloy Steel RTJ Flanges |
| Alloy steel A182 Threaded Reducing Flanges | Alloy Steel Reducing Flanges |
| Alloy steel A182 Wnrf Flanges | ASME SA182 Reducing Flanges |
| Alloy steel A182 Split Flanges | Alloy Steel Reducing Flange |
| Alloy steel A182 Turbo Flanges | Alloy steel A182 Forged Flanges |
| Alloy steel A182 Vacuum Flanges | Alloy steel A182 Reducing Flange |
| Alloy steel A182 Alloy Steel Reducing Flanges | Alloy Steel Forged Flange |
Manufacturing Alloy steel flanges in Pune, Maharashtra, MSI Fittings holds a wide range of Alloy steel threaded flanges in stock for immediate despatch throughout Pune, Maharashtra & globally.
Special offer on:
| Flange Schedule/Class | Pipe Size - Pipe Flanges | Flange Connection Type | Flange Material | Max. Pressure |
|---|---|---|---|---|
| ASME B16.5 Class 150 | 1/2" | FNPT | Alloy Steel | 150 psi |
| ASME B16.5 Class 150 | 1/2" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 1/2" | Welded | Alloy Steel | 150 psi |
| ASME B16.5 Class 150 | 3/4" | FNPT | Alloy Steel | 150 psi |
| ASME B16.5 Class 150 | 3/4" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 1-1/4" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 1-1/2" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 2" | FNPT | Alloy Steel | 150 psi |
| ASME B16.5 Class 150 | 2" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 2-1/2" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 3" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 150 | 4" | FNPT | Alloy Steel | 150 psi |
| ASME B16.5 Class 150 | 4" | Socket Weld | Forged Alloy Steel | 275 psi |
| ASME B16.5 Class 300 | 1/2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1/2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1-1/4" | FNPT | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1-1/4" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1-1/2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 1-1/2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 2-1/2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 2-1/2" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 3" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 3" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 4" | Slip On | Forged Alloy Steel | 720 psi |
| ASME B16.5 Class 300 | 4" | Slip On | Forged Alloy Steel | 720 psi |
Alloy Steel Forged and Plate Flange
| Alloy Steel Flange | |
| ASTM A182 Alloy Steel Slip-On Flange | ASTM A182 Alloy Steel Threaded Flange |
| ASTM A182 Alloy Steel Weld Neck Flange | ASTM A182 Alloy Steel Socket Weld Flange |
| ASTM A182 Alloy Steel Blind Flange | ASTM A182 Alloy Steel Reducing Flange |
| ASTM A182 Alloy Steel Lap Joint Flange | ASTM A182 Alloy Steel Plate Flange |
| ASTM A182 Alloy Steel Orifice Flange | ASTM A182 Alloy Steel Forged Flange |
| ASTM A182 Alloy Steel Ring Type Joint Flange | ASTM A182 Alloy Steel Square Flange |
Alloy Steel Pipe Flange Pressure Ratings
Alloy steel threaded flanges Flange Standards / Types and Pressure Class :
| ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
Our happy customers in whole India
MSI Fittings is a Govt. approved certified Alloy steel threaded flanges exporter in India. All of our Alloy steel pipe flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. MSI Fittings is known as a trusted vendor as a Alloy steel threaded flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.