Inconel 600 Flanges Manufacturers in India
MSI Fittings is one of the largest exporter, manufacturer and supplier of Inconel 600 Flanges in India.These flanges are subject to stress corrosion cracking in hot, concerted caustic alkalies. These UNS N06600 Flanges has useful resistance to dehydrate HCl and Cl2 gases at moderately elevated temperatures. Alloy 600 Flanges is a nickel-base product in the company of having excellent carburization, and outstanding oxidation resistance at elevated temperatures.

UNS N06600 Orifice Flanges, Inconel 600 Weld Neck Flanges Exporter, 600 Inconel RTJ Flange Leading Manufacturer.
The Asme B16.5 Inconel 600 Flange exhibits good resistance across a broad range of corrosive mediums. The chromium content in the Alloy 600 Flanges gives them better resistance as compared to both Alloy 200 as well as alloy 201 under oxidizing conditions. At the same time, the high content of nickel in the alloy offers good resistance to reducing conditions as well.
Our WNR 2.4816 Flangesis not recommended for the use at red temperature when sulfur is existentbecause ofhigh nickel amounts.However, when sulfur composites are present too, or for ammonium hydroxide service, Alloy 600 Flanges is recommended. These are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.
Another important characteristic of the Nickel Chromium Alloy 600 Flange is its high or superior immunity to chlorine ion stress related corrosion cracking. Inconel 600 Threaded Flanges also demonstrates satisfactory resistance to organic acids such as formic acid, acetic acid and stearic acid.
The higher chromium content in the alloy ensures resistance to corrosion against sulfur containing compounds. Addition of chromium by the ASTM B564 Uns N06600 Flanges Manufacturers India makes the alloy superior to commercially pure nickel under oxidative conditions. In b oxidative solutions such as hot, concentrated nitric acid, B564 Uns N06600 Alloy 600 Wnrf Flange has poor resistance. Inconel 600 is fairly un-attacked by a majority of neutral solutions as well as alkaline salt solutions. Hence, these flanges produced from Inconel 600 can be used in some caustic environments. Inconel 600 flanges are known to resist steam, mixtures of steam, air and carbon dioxide. Due to its excellent resistance to high purity water, flanges made from Inconel 600 can be used in primary and secondary circuits of pressurized nuclear reactors.
In the presence of dry gases, such as chlorine or hydrogen chloride Little or no attack will occur on the Alloy 600 Forgings at room and elevated temperatures. At temperatures that could rise up to 550C in these mediums, the N06600 Raised Face Weld Neck Flange ANSI B16.5 has been shown to be one of the most resistant out of the other conventional alloys. At elevated temperatures, an annealed and solution annealed treated Incoloy 600 Forged Flange will shows good resistance to scaling. One of the main characteristic of the Nickel 600 Spectacle Blind Flange is its high tensile strength. Inconel 600 is also known to resists ammonia bearing atmospheres, just as well as it tends to resist nitrogen atmospheres and carburizing gases. Under alternating oxidizing and reducing conditions Inconel 600 can suffer from selective oxidation. Inconel 600 Flanges contain elements such as nickel & chromium as base in the alloy. The Alloy 600 Weld Neck Flange Dimensions have been designed to be used at a wide range of temperatures from cryogenic to elevated temperatures up to a range of 2000 deg F.
Asme Sb 564 N06600 Slip On Flanges is nonmagnetic in nature and it has excellent mechanical properties. For instance, the mechanical properties of Alloy 600 flanges include a combination of high strength, good workability and good weldability. Inconel 600 displays cold forming characteristics, one which is normally accompanied with most chromium / nickel stainless steel grades. Typically, the Alloy 600 Pipe Flange Weight Chart can find use in many applications. For example, the Inconel 600 Orifice Flange is seen used in applications such as perchlorethylene syntheses, vinyl chloride monomer (VCM), corrosion applications of the include titanium dioxide production (chloride route) and magnesium chloride. Apart from these applications, Inconel 600 can also be used in industries such as heat treating, phenol condensers, soap manufacture, chemical and food processing, vegetable and fatty acid vessels and many more.
MSI Fittings is the manufacturer and supplier of Inconel 600 flanges. Check out the Nickel Alloy 600 Flanges Price List.
ANSI B16.5 Inconel 600 Flanges Specification
Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.
Specifications : ASTM B564 / ASME SB 564
Size : 1 / 2” to 36″
Class : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Grade : Inconel 600 – UNS N06600
Our Inconel 600 Flanges conforms to NACE MR0175/ISO 15156
Inconel 600 Flange manufacturers in India

Steel B564 600 Threaded Flange

Alloy 600 Lap Joint Flange

ASTM B564 600 Long WN Flange

ASTM B564 600 Spectacle Blind Flange

ASTM B564 600 Plate Flange

ASTM B564 600 Ring Joint Flange

ASTM B564 600 Tongue & Groove Flange

Inconel 600 Reducing Flanges

Alloy 600 Slip On Flange

Alloy 600 Socket Weld Flange
.jpg)
Alloy 600 Blind Flange
.jpg)
Alloy 600 Welding Neck Flange

ASTM B564 600 Raised Face Flange

ASTM B564 600 Male & Female Flange

Inconel 600 Weldoflange

Inconel 600 Puddle Flanges

ASTM B564 600 Spacer Flange

Alloy 600 High Hub Blind Flange
.jpg)
Inconel 600 Forged Flange

Inconel 600 Bleed Rings

ASTM B564 600 Orifice Flange

ASTM B564 600 Square Flange

Inconel 600 Nipo flange

B564 600 Spade Flange
Inconel 600 Flanges Flange Standards / Types and Pressure Class :
ASME/ANSI B 16.5 | Slip on Flange, Welding Neck Flange, High Hub Blind Flange, Blind Flange,Lap Joint Flange, Socket Weld Flange, Ring Type Joint Flange, Threaded Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.47 | Blind Flange [Series A & B], Welding Neck Flange |
PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
ASME/ANSI B 16.36 | Slip on Flange, Welding Neck Flange, Threaded Flange |
PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
BS 4504 SEC 3.1 | Hubbed Slip on Flange, Welding Neck Flange, Lapped Pipe End Flange, Hubbed Threaded Flange, Loose Plate Flange, Plate Flange, Blank Flange, Loose Plate With Weld Neck Flange |
PRESSURE CLASS | PN 2.5 TO PN 40 |
BS 4504[PART 1] | Welding Neck Flange, Plate Flange, Hubbed Slip-On Hubbed Threaded,Blank Flange, Loose Plate With Weld On Plate Collar |
PRESSURE CLASS | PN 2.5 TO PN 400 |
BS 1560 BOSS | Socket Welding Flange, Welding Neck Flange, Blind Flange, Slip-On Flange, Lapped Flange, Screwed Boss Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
BS10 | Plate Slip-On Flange, Welding Neck Flange, Slip-On Boss Flange, Screwed Boss Flange, Blind Flange |
TABLE | D, E, F, H |
DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
PRESSURE CLASS | PN 6 TO PN 100 |
Dimensions of Inconel 600 Pipe Flange
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) |
|
---|
Alloy 600 Flanges Weight Chart
15mm (1/2") Inconel 600 Flange Weight Chart
Standard |
Class |
Diameter |
Bolt Circle Diameter |
Number of Bolts |
Bolt Size |
Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 Flanges |
PN14 Flanges |
95 |
67 |
4 |
M12 |
14 |
AS 2129 Flange |
Table C Flanges |
95 |
67 |
4 |
13 |
14 |
Table D Flanges |
95 |
67 |
4 |
13 |
14 |
|
Table E Flanges |
95 |
67 |
4 |
13 |
14 |
|
Table F Flanges |
95 |
67 |
4 |
13 |
14 |
|
Table H Flanges |
114 |
83 |
4 |
16 |
17 |
|
Table J Flanges |
114 |
83 |
4 |
16 |
17 |
|
ANSI B16.5 Flanges |
ANSI 150 Flanges |
89 |
60 |
4 |
13 |
16 |
ANSI 300 Flanges |
95 |
67 |
4 |
13 |
16 |
|
ANSI 600 Flanges |
95 |
67 |
4 |
13 |
16 |
|
ANSI 900 Flanges |
121 |
83 |
4 |
19 |
22 |
|
ANSI 1500 Flanges |
121 |
83 |
4 |
19 |
22 |
|
ISO 7005 (DIN) Flange |
PN6 Flanges |
80 |
55 |
4 |
M10 |
11 |
PN10 Flanges |
95 |
65 |
4 |
M12 |
14 |
|
PN16 Flanges |
95 |
65 |
4 |
M12 |
14 |
|
PN20 Flanges |
90 |
60.5 |
4 |
M14 |
16 |
|
PN25 Flanges |
95 |
65 |
4 |
M12 |
14 |
|
PN40 Flanges |
95 |
65 |
4 |
M12 |
14 |
Inconel 600 Flanges other types
ASTM B564 600 Backing Flanges |
Inconel 600 Steel RTJ Flanges |
ASTM B564 600 Plate Flanges |
ASTM B564 600 RTJ Flanges |
ASTM B564 600 Header Flanges |
600 Inconel RTJ Flanges |
ASTM B564 600 Exhaust Flanges |
Alloy 600 Reducing Flanges |
ASTM B564 600 Pipe Flanges |
ASME SB564 600 Reducing Flanges |
ASTM B564 600 Slip On Flanges |
Inconel 600 Reducing Flange |
ASTM B564 600 Socket Weld Flanges |
Alloy 600 Raised Face Weld Neck Flanges |
ASTM B564 600 Shower Rod Flanges |
ASTM B564 600 Sae Flanges |
Ansi 150 ASTM B564 600 Flanges |
Inconel 600 Weld Neck Flange |
ASTM B564 600 Screwed Flanges |
ASTM B564 600 Clad Flanges |
ASTM B564 600 Stub End Flanges |
ASTM B564 600 Inconel 600 WNRF Flange |
ASTM B564 600 Sbc Header Flanges |
Alloy 600 Raised Face Blind Flanges |
ASTM B564 600 Companion Flanges |
ASME SB564 600 Blind Flanges |
Custom ASTM B564 600 Flanges |
Inconel 600 Blind Flange |
ASTM B564 600 Square Flanges |
ASTM B564 600 Ansi Flanges |
ASTM B564 600 Tube Flanges |
ASTM B564 600 Inconel 600 BLRF Flanges |
ASTM B564 600 Blank Flanges |
Alloy 600 Orifice Flanges |
ASTM B564 600 Bsp Flanges |
ASME SB564 600 Orifice Flanges |
ASTM B564 600 Split Flanges |
Inconel 600 Orifice Flanges |
ASTM B564 600 Class 150 Flanges |
ASTM B564 600 Duct Flanges |
ASTM B564 600 Cover Flanges |
B564 600 Inconel 600 Orifice Flanges |
ASTM B564 600 Slip-On Pipe Flanges |
Alloy 600 Socket weld Flanges |
Class 600 ASTM B564 600 Flanges |
ASME SB564 600 Socket weld Flanges |
Gaskets For ASTM B564 600 Flanges |
Alloy 600 Raised Face Slip On Flanges |
ASTM B564 600 Handrail Flanges |
ASME SB564 600 Slip On Plate Flanges |
High Pressure ASTM B564 600 Flanges |
Inconel 600 Slip On Flanges |
ASTM B564 600 Lap Joint Flanges |
B564 600 UNS S32750 Pipe Flanges |
ASTM B564 600 Long Weld Neck Flanges |
Alloy 600 Exhaust Flanges |
ASTM B564 600 Metric Flanges |
ASME SB564 600 Header Flanges |
ASTM B564 600 Din Flanges |
Inconel 600 Socket weld Flanges |
Large Diameter ASTM B564 600 Flanges |
ASTM B564 600 SWRF Flanges |
Table E ASTM B564 600 Flanges |
ASME B16.5 Inconel 600 Socket weld Flanges |
ASTM B564 600 Floor Flanges |
Alloy 600 Threaded Flanges |
ASTM B564 600 Forged Flanges |
ASME SB564 600 Threaded Flanges |
ASTM B564 600 Pad Flanges |
Inconel 600 RTJ Flanges |
ASTM B564 600 Reducing Flanges |
ASTM B564 600 Threaded Flanges |
ASTM B564 600 Raised Face Flanges |
Alloy 600 Long weld Neck Flanges |
ASTM B564 600 Ring Flanges |
ASME SB564 600 Long weld Neck Flanges |
ASTM B564 600 Threaded Reducing Flanges |
Inconel 600 Long weld Neck Flanges |
ASTM B564 600 Wnrf Flanges |
ASTM B564 600 Orifice Flanges |
ASTM B564 600 Split Flanges |
Alloy 600 Ring Type Joint Flanges |
ASTM B564 600 Turbo Flanges |
ASTM B564 600 Forged Flanges |
ASTM B564 600 Vacuum Flanges |
ASTM B564 600 Reducing Flange |
ASTM B564 600 Reducing Flanges |
Inconel 600 Forged Flange |
ASTM B564 600 Puddle Flanges |
ASME SB564 600 Ring Type Joint Flange |
ASTM B564 600 Muffler Flanges |
Inconel 600 Threaded Flanges |
ASTM B564 600 Pump Flanges |
ASTM B564 600 Manifold Flanges |
ASTM B564 600 Pressed Flanges |
ASTM B564 600 Threaded Flanges |
Special offer on:
Flange Schedule/Class |
Pipe Size - Pipe Flanges |
Flange Connection Type |
Flange Material |
Max. Pressure |
---|---|---|---|---|
ASME B16.5 Class 150 |
1/2" |
FNPT |
Inconel 600 |
150 psi |
ASME B16.5 Class 150 |
1/2" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
1/2" |
Welded |
Inconel 600 |
150 psi |
ASME B16.5 Class 150 |
3/4" |
FNPT |
Inconel 600 |
150 psi |
ASME B16.5 Class 150 |
3/4" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
1-1/4" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
1-1/2" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
2" |
FNPT |
Inconel 600 |
150 psi |
ASME B16.5 Class 150 |
2" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
2-1/2" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
3" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 150 |
4" |
FNPT |
Inconel 600 |
150 psi |
ASME B16.5 Class 150 |
4" |
Socket Weld |
Forged Inconel 600 |
275 psi |
ASME B16.5 Class 300 |
1/2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1/2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1-1/4" |
FNPT |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1-1/4" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1-1/2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
1-1/2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
2-1/2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
2-1/2" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
3" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
3" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
4" |
Slip On |
Forged Inconel 600 |
720 psi |
ASME B16.5 Class 300 |
4" |
Slip On |
Forged Inconel 600 |
720 psi |
Alloy 600 Forged and Plate Flange
ASTM B564 Alloy 600 Slip-On Flange |
ASTM B564 Alloy 600 Threaded Flange |
ASTM B564 Alloy 600 Weld Neck Flange |
ASTM B564 Alloy 600 Socket Weld Flange |
ASTM B564 Alloy 600 Blind Flange |
ASTM B564 Alloy 600 Reducing Flange |
ASTM B564 Alloy 600 Lap Joint Flange |
ASTM B564 Alloy 600 Plate Flange |
ASTM B564 Alloy 600 Orifice Flange |
ASTM B564 Alloy 600 Forged Flange |
ASTM B564 Alloy 600 Ring Type Joint Flange |
ASTM B564 Alloy 600 Square Flange |
Inconel 600 Flanges Chemical Composition
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
Inconel 600 |
0.15 max |
1.00 max |
0.50 max |
0.015max |
0.50 max |
6.00 – 10.00 |
72.00 min |
14.00 – 17.00 |
Inconel 600 Flanges mechanical properties
Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
Inconel 600 |
8.47 g/cm3 |
1413 °C (2580 °F) |
Psi – 95,000 , MPa – 655 |
Psi – 45,000 , MPa – 310 |
40 % |
Equivalent Grades for Inconel 600 Flanges
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
Inconel 600 |
2.4816 |
N06600 |
NCF 600 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NC15FE11M |
NiCr15Fe |